SOFTAIL KICKSTAND LIFT BLOCK
- Home
- Install Instructions - Misc
- SOFTAIL KICKSTAND LIFT BLOCK
Categories
Installation Instructions
SOFTAIL KICKSTAND LIFT BLOCK
First, remove the kickstand from the frame of the bike, by removing the two mounting bolts that attach the kickstand mount to the frame or by pulling the return spring and pivot pin.
Once the kickstand is removed, place the lift block onto the base of the kickstand and line the block up so the tip of the kickstand sits against the ledge of the kickstand block.
Next, use a 1/8" drill bit and drill the kickstand using the 1/8" thru hole in the kickstand block as a pilot hole. Some of the newer version kickstand blocks, there may be multiple holes depending on the kickstand you are using. Locate the holes that will give you clearance to install the bolt from the top of the kickstand and use only this hole or holes for installation.
Once the pilot hole is drilled into the kickstand itself, you can use a 17/64 drill bit to enlarge the hole in the kickstand itself. Once this hole is drilled, you can install the kickstand block onto the kickstand and attach with the supplied bolts using red loctite and reinstall on to your bike.