-
1/2 x 13 Threaded Bungs
tb12c$5.00 - $5.75These weld in threaded bungs are made from 7/8" OD round mild steel bar stock they are drilled and threaded for 1/2" x 13 SAE thread. The 1" length are threaded through and the 2" length ones... -
2" Threaded bullets
RTB2$4.00These weld on threaded bullet bungs are made of solid cold rolled steel and drilled and tapped to your thread choice. These are blind bungs (hole does not go all the way through) and are rounded with... -
1" Stainless Threaded Bullet
$4.50These weld on threaded bullet bungs are made of solid stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a... -
Wide Flange 1/2 x 13 Threaded Stepped Handlebar bung
WFSHBB12C$9.75These are one of our larger versions of our weld in stepped or tophat style bungs. These ones are drilled and tapped through for a 1/2" x 13 bolt the same size used in most handlebar mounting. The... -
1" Long Threaded Bullets
rtb1$3.50These weld on threaded bullet bungs are made of solid cold rolled steel, drilled and tapped to your thread choice. These are blind bungs meaning the hole does not go all the way through. One end of...
Description
This is one of our larger bullets, it is made from 7/8" dia cold rolled steel and drilled and tapped to accept 1/2" x 13 hardware. It is an overall length of 3" and is the bullet that normally comes in our motor mount kits but can be used for all sorts of other fabrication projects.
- Made from 7/8" dia cold rolled steel
- 3" overall in length
- drilled and tapped to accept 1/2" x 13 hardware
- Sold each