-
Arched Mounting Tab 3/8" or 5/16" hole
AMT$4.25This is an extra thick mounting tab to hold up to those harsh applications. It is made of 1/4" thick mild steel to reduce bending or distorting under load like the stamped steel ones that are made of... -
5/16" x 18 Threaded bungs
TB516C$3.00 - $3.255/16"-18 Weld-In Threaded Bungs – 1018 Mild Steel These weld-in bungs are machined from solid 1018 cold rolled mild steel round stock, then drilled and threaded to 5/16"-18 SAE coa -
Universal Weld on 3/8" Hole Tab
UWOT38$4.00This is a 1/4" thick weld on mounting tab to hold up to those harsh applications. It is made of 1/4" thick mild steel to reduce bending or distorting under load like the stamped steel ones that... -
5/16" x 18 Stainless Threaded Bung
TB516CSS$4.00 - $4.255/16"-18 Stainless Steel Weld-In Threaded Bungs These 5/16"-18 weld-in threaded bungs are machined from solid stainless steel round stock and are built to handle demanding fabri -
Brake Stay Tab with Lightening Holes
BSTwL$6.00Brake Stay Tab With Lightening Holes • Weld on tab for your rear brake stay and other uses • Made from 3/16" thick mild steel • 3/8 Diameter hole • Two 1/2" lightening holes • CNC cut • Sold Each for...
Description
This is a 1/4" thick weld on mounting tab to hold up to those harsh applications. It is made of 1/4" thick mild steel to reduce bending or distorting under load like the stamped steel ones that are made of 1/8" or thinner that are on the market. We have used these for all sorts of fabrication projects where a weld on threaded hole or tab is needed. The hole will accept a 5/16 x 18 bolt.
- Made from 1/4" thick Mild Steel
- CNC cut
- Threaded hole is 1.5" from bottom edge
- 1" x 2" overall dimension
- Sold Each for $4.50