Crashbar with Big Bear/ Chopper Haus Motor Mount

Crashbar Installation Instructions
BBC/Chopper Haus Mount

Your crashbar kit includes a pair of adapter blocks designed to work with the BBC motor mount. Here's how to install them:

If the motor mount is already installed, begin by removing one of the lower bolts that secures the motor mount to the frame.
Position one adapter block over the motor mount so that the threaded holes are oriented above the counterbored holes.
Reinstall the bolt through one of the counterbored holes in the adapter block and into the frame.
With the first bolt started, remove the upper motor mount bolt, rotate the adapter block into place, and reinstall the upper bolt through the second counterbored hole.
Torque both bolts securely, completing one side at a time.

With both adapter blocks in place, simply slide the crashbar into position.
Attach the crashbar using the supplied hardware, threading the bolts into the threaded holes on the adapter blocks.

If you're installing on a 2006–2017 Dyna, you’ll need to remove the regulator from the frame before positioning the crashbar.
Once the crashbar is mounted, reinstall the regulator onto the relocation tab provided on the crashbar.

Thank you for choosing our product!
If you have any questions or need support, feel free to reach out.