Fairing Bracket Installation for 2023 & Up RG3 Road Glide Models

Fairing Bracket Kit Installation Instructions

Fits: 2023 & Up RG3 Road Glide Models

Parts Included:

  • Fairing Bracket
  • (2) ¼"-20 Button Head Bolts
  • (2) Washers
  • (2) Aluminum Spacers (optional use)

Installation Steps:

  1. Mounting to Gas Tank:
    • Locate the tab on the fairing bracket with a single hole.
    • This tab mounts to the gas tank bolt location using the factory bolt (not supplied).
    • Ensure the tab faces downward, so the bolt head is concealed when viewed from the rider’s position.
  2. Mounting to Fairing:
    • The opposite end of the bracket attaches to the lower section of the fairing.
    • Use the supplied ¼"-20 button head bolts and washers to fasten the bracket into the brass inserts on the fairing.
  3. Using the Aluminum Spacers (if needed):
    • Some installations may require improved alignment between the bracket and fairing.
    • If needed, insert the aluminum spacers between the fairing bracket tab and the gas tank mounting point before tightening the bolt.

Final Check:

  • Confirm all bolts are tightened securely.
  • Double-check alignment of the fairing and bracket for a proper fit.
  • Make sure the bracket sits flush and does not interfere with tank or fairing movement.