-
Weld On Pivot Bushings
WOPB$5.50 - $6.50These parts are great for making lower controls sprung seat piviots and anything else that needs to pivot or rotate freely without premature wear on your hardware. These are mild steel fittings... -
Universal Footpeg Pivot
PMP$50.00This is a Universal footpeg piviot. It is tapped at either end to accept 3/8 x 16 hardware and made of stainless steel for long life. These are often used for those making their own footpegs or... -
Sprung Seat Front Pivot
SSFP$27.00Spring Seat Front Piviot Our front pivot contains stainless shoulder bolts for a snug fit and bronze oilite bushings for trouble free operation. When used properly, these pivots remove most side to... -
Non Pivoting Footpeg Adapter
FPA-NP$19.50These new adapters fit the factory later style clevis of most Harley Models 1984-2017. The non pivoting option would be used for those needing to keep their foot fixed under the peg during... -
Weld-In Riser Spuds
WIRS$10.00 - $12.00Weld In Riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing...
Description
This is another version of our weld on pivot assemblies. This one is counter-bored to accept a shouldered bolt so that the bolt can be tightened completely and still allow free movement in a radial direction. The assembly comes with a wave washer that is installed on the backside of the pivot to help remove any slop or free-play but still allow free movement. These can be used for foot control parts, jockey shifter or any other part you are making that needs to move freely in a radial direction.
- 7/8" OD mild steel bung that is 7/8" overall length
- High temp graphite impregnated bronze bushing
- Stainless shoulder bolt with 5/16 x 18 thread
- Sold as one assembly