Internal Oil tank Tubes

When making a custom oil tank you may choose to have all of your oil line fittings at the bottom of the tank instead of having the vent and return lines at the top of the tank. These tubes can be welded to the top of the npt bung before the npt bungs are welded into the tank. The straight tube is ment for the vent line so that the top of the tube is at the top of the oil tank and in the air space of the tank. The bent line is for the return line, the bend helps direct the hot oil to the other side of the oil tank so the colder oil will be drawn into the feed line. The tubing is 3/8" dia and a wall thickness of .065"

• Made of 3/8" O.D. x .065" wall mild steel tubing
• WIll work on up to 6" in dia and can be trimmed to length for smaller tanks