Motorcycle Parts

Upper Shock Frame Sliders for 1995–2021 Harley-Davidson Sportster Models (XL883, XL883C, XL883R, XL883L, XL883N, XL1200, XL1200C, XL1200L, XL1200N, XL1200R, XL1200T, XL1200V, XL1200X, XL1200XS) Protect your rear shocks and frame with our Upper...

Heavy-Duty Axle Adjuster / Chain Tensioner Plates for Pre-2005 Dyna, FXR & Early Sportster Models Upgrade your rear axle stability with our Heavy-Duty Chain Tensioner Plates, designed to replace the weak factory end caps on the swingarms of select...

REPLACEMENT SQUISH PLATE FOR DYNA, SPORTSTER & FXR MODELS Made of cnc cut steel plate Powder-coated Gloss Black Finish Rubber bumpers not included Fitment for Dyna, Sportster & FXR Squish Plates   INSTALL INSTRUCTIONS:   06 and Up...

Dyna, Sportster & FXR Squish Plate Assembly – Adjustable 12 Bar Style with Replaceable Parts Take your stunt game to the next level with our Squish Plate Assembly, designed for Harley-Davidson Dyna, Sportster, and FXR models. This setup offers...

The Upper shock Mount Slider replacement hardware kit comes with all of the hardware and spacers needed to replace the factory parts and keep everything in alignment. You can also purchase individual replacement parts instead of the hardware pack. All...

Delrin frame sliders have been used on street bikes for years to protect the sides of them in case of a crash. Delrin by nature is very resistant to shattering under high impact and has a slippery quality making it slip across the pavement as opposed to...

  Replacement Hardware Pack for Crashbar Installation   Models: 06 and Up Dyna 03 and Earlier 04-05 Dyna Sportster, 03 and earlier Sportster, 04 and Up FXR 2018 Softail mid control models: 2-Step, High Bar, High Step, S, ST Bagger FLH Models,...

Swing Arm Lift Kit Replacement Hardware  Available for all Dyna models and 2005 and up Sportsters Grade 8 hardware      Includes: Qty 4 Bolts Qty 8 Washers Qty 4 Nyloc Jamnuts

This Crown Air Cleaner Cover Plate works great with those who are running a stage 1 or stage 2 breather kit, or similar one from the aftermarket.  In the past, if you did not want to run the factory air cleaner cover, you were left with very few...

These new 2018 adapters fit the factory later style clevis for 2018 Softail Harley Models.  The clevis is adjustable for 360 degrees of rotation so your desired peg pitch can be set to fit your needs.  Footpegs are sold in pairs for the rider...

 These t-bars are built with strength and style in mind.  We add gussets to our T-bars for the most demanding of riders, this gives extra strength for piece of mind and good looks. We offer our t-bars in a few different heights.  Item...

This is the replacement hardware needed to bolt the sideplates to the quick releases for our 39mm quarter fairing bracket kit.     The 39mm hardware kit includes the following: Qty 4 Bolts Qty 4 Washers

39mm Quarter Fairing Bracket Kit for 2005 & Earlier Dyna, FXR, and Sportster Models Designed for 39mm narrow glide front ends, this 39mm Quarter Fairing Bracket Kit is the perfect upgrade for 2005 and earlier Harley-Davidson Dyna models, as well as...

Product Description – Harley Stunt Rear Sprocket Harley Stunt Rear Sprocket – Treated Steel, Large Tooth Options for Torque & Wheelie Control Built for stunt riders and torque-focused builds, our Harley Stunt Rear Sprocket is CNC-cut from...

Dyna Chain Slider – Protect Passenger Peg Mount from Chain Contact When converting your 2006 and newer Dyna to a chain drive, the chain often contacts the passenger peg mount during suspension rebound. On some models, the chain can even rub...

The Softail Tank Lift/Mounts are designed for 2018 and up softails to give their tanks that ever popular Frisco look. They install in a few minutes. Most of the time, not even having to change the crossover tube. Fit 2018 and Up Softail Made of 1018...

These Dyna Tank Lifts/Mounts are designed for 2005 and earlier Dynas to give their tanks that ever popular Frisco look. Like all of our bolt on products, they are made to last and built from 3/16 and 1/4" thick steel. They install in a few minutes. For...

These Dyna Tank Lifts/Mounts are designed for late model Dynas to give their tanks that ever popular Frisco look. They install in a few minutes.  Most of the time, not even having to change the crossover tube. Fits 2006 to present Dyna Made of 1018...

This is an adapter bracket kit to mount a factory style HD Dyna T-Sport fairing to the 2018 to present Harley Davidson Fat Bob. The adapter kit creates the mounting points that the special 39mm t sport triple trees provided in the past. The kit come with...

A slightly different twist on the standard highway peg mount for your Dyna or FXR shaped into the state of California. The plates are CNC cut from 1/4" thick mild steel, the same as the factory ones, and powdercoated black. All of the holes are already...

This is an adapter kit to mount a factory HD Dyna T-Sport fairing to the later 49mm front forks. The adapter kit creates the mounting points that the special 39mm t sport triple trees provided in the past. The kit come with an upper and lower mount as...

Weld In Riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size for...

This is our new brass gas cap for fitment on all HD models from 1986 on up to present. The top is made of solid brass and comes with the same O-ring and thread used by the factory. They feature a knurled outer edge for good looks and extra grip for...

These are our Gripper Adjustable Foot Pegs. Their larger platform allows greater control and larger spread of you body weight. The 7 threaded holes around the perimeter allow adjustment of grip to suit your needs by simply changing the hardware length or...

These new universal footpeg adapters fit the factory style clevis of most later Harley Models on one side. The other side is drilled and tapped to 9/16 x 20 to fit a set of BMX or mountain bike pedals. One adapter is tapped for right hand thread and the...

Weld On Coped Riser Spuds These bungs are used to take place of a standard bolt on riser clamp. They are ment to be welded to your favorite set of bars using the coped section of the bung to fit around the correct tubing size. They are threaded to...

Harley Rear Wheel Hub Spacers – Precision Aluminum for Perfect Chain & Rotor Alignment Ensure flawless drivetrain performance with our Harley Rear Wheel Hub Spacers, engineered to create the correct offset between your rear wheel hub and...

These are stainless heim joints/ rod ends are  used commonly in the bike industry for shifter rods. The common thread  used in most Factory HD and aftermarket shifter rods is 5/16" x 24. Also available in 1/4 x 28. They can also be used when...

This is the replacement delrin slider end for our highway peg and passenger peg crashbars.  These are similar to our standard end with some added grip to keep your foot in place.  Direct replacement for any of our front crashbar ends. They are...

Recently, Harley Davidson discontinued the production of some of the parts for the Dyna T-sport Fairings.  One of these parts were two main side plates that connect the fairing to the front fork assembly. These brackets also provided a mounting...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Grey Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Red Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Orange Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Green Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Yellow Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from blue Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from white Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from blue Delrin. They are available with or...

Rubber Tank Mount Kit These mounts are most commonly used for mounting gas tanks and oil tanks. The rubber isolaters help reduce the risk of cracks developing in your fluid container. They use the common flat side tank mount rubbers that can be found at...

These are a direct replacement for our delrin slider ends used on our Upper Shock Sliders and 2018 and up Passenger Peg Frame Sliders.  These are similar to our standard slider but made from Grey Delrin, so they can be a direct replacement for any...