Foot Controls

 Our new Crash Pads are a footpeg that mounts to your passenger peg crashbar through the slider end.  They give your passenger a solid resting place on your passenger peg crashbar for those long rides.  Made of 1018 mild steel with...

These new adapters fit the factory later style clevis of most Harley Models 1984-2017.  The non pivoting option would be used for those needing to keep their foot fixed under the peg during stunt riding.  Can be used on any current or previous...

These adapters fit the factory later style clevis of most Harley Models. Thet are tapped at the other end with a 3/8 x 16 thread so that a footpeg of your choice can be threaded on with a stud. This allows you to cost effectively make a set of footpegs...

These parts are great for making lower controls sprung seat piviots and anything else that needs to pivot or rotate freely without premature wear on your hardware.  These are mild steel fittings with a bronze bushing already pressed into place...

These are industrial heim joints also known as rod ends are made of stainless steel for extra long life in the most demanding conditions. We use them commonly in the 5/16 size shifter links and in the 3/8 size for brake stays but they can also be used in...

This mount is for those of you not using the standard forward controls on softails, early rigid, and aftermarket frames, but would like to run the factory bolt-on kickstand. From the factory, the only way they leave you to bolt on your kickstand is...

For use to mount Wagner style master cylinder to the front of a four speed transmission when using custom forward controls. -1/4" thick mild steel - CNC cut

Need a special length Shift Linkage and can't find anyone that carries your size? We now offer linkages made to your specified length. They are made with a stainless center rod, cut to your specific length and come with your choice of our Stainless or...

This is our Jockey shift motor mount kit, it is designed for those looking to make a motor mount with an integral pivot for a jockey shift handle. They are available for all Harley motor types. You bolt the center pin that is tapped to accept a 1/2 x 13...

This is a Universal footpeg piviot. It is tapped at either end to accept 3/8 x 16 hardware and made of stainless steel for long life. These are often used for those making their own footpegs or adapting some to fit with your controls. tapped to 3/8 x 16...

Our Grabber Foot pegs are a direct bolt on to most later Harley Davidson models.  These foot pegs are a great way to give you that motocross MX feel on the street.  The extra grip helps keep your feet in place for aggressive riders.  The...

This is our Shoe Saver Shifter peg. If you have a bunch of left shoes that looked destroyed on the top then these are for you. They are made of the same Delrin Material we make our crash cage and slider ends. The Polymer is very abrasion resistant as...

Dyna Mid Control Adjustable Shifter Linkage This shifter linkage is designed for late model Dynas with factory mid controls. It replaces the non-adjustable linkage that is prone to failure. We have had several customers come in with broken factory links,...

These are our Gripper Adjustable Foot Pegs. Their larger platform allows greater control and larger spread of you body weight. The 7 threaded holes around the perimeter allow adjustment of grip to suit your needs by simply changing the hardware length or...

These new 2018 adapters fit the factory later style clevis for 2018 Softail Harley Models.  The clevis is adjustable for 360 degrees of rotation so your desired peg pitch can be set to fit your needs.  Footpegs are sold in pairs for the rider...

This is the replacement delrin slider end for our 2018 and up passenger peg crashbars.  These are similar to our standard end with some added grip to keep your foot in place.  They are available with or without the bolt needed to attach them...

These are similar to our ever popular Shoe Saver Shifter peg with a little added grip. They are made of the same Delrin Material we make our crash cage and slider ends. The Polymer is very abrasion resistant as well as highly shatter resistant from hard...

These are our Gripper Adjustable Foot Pegs. Their larger platform allows greater control and larger spread of you body weight. The 7 threaded holes around the perimeter allow adjustment of grip to suit your needs by simply changing the hardware length or...

These new universal footpeg adapters fit the factory style clevis of most later Harley Models on one side. The other side is drilled and tapped to 9/16 x 20 to fit a set of BMX or mountain bike pedals. One adapter is tapped for right hand thread and the...

This is the replacement delrin slider end for our highway peg and passenger peg crashbars.  These are similar to our standard end with some added grip to keep your foot in place.  Direct replacement for any of our front crashbar ends. They are...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Grey Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Red Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Orange Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Green Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from Yellow Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from blue Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from white Delrin. They are available with or...

These are a direct replacement for our delrin slider ends of our highway peg and all other front crashbars as well as the dyna passenger peg crashbar.  These are similar to our standard end but made from blue Delrin. They are available with or...

These are a direct replacement for our delrin slider ends used on our Upper Shock Sliders and 2018 and up Passenger Peg Frame Sliders.  These are similar to our standard slider but made from Grey Delrin, so they can be a direct replacement for any...

These are a direct replacement for our delrin slider ends used on our Upper Shock Sliders and 2018 and up Passenger Peg Frame Sliders.  These are similar to our standard slider but made from Green Delrin, so they can be a direct replacement for any...

These are a direct replacement for our delrin slider ends used on our Upper Shock Sliders and 2018 and up Passenger Peg Frame Sliders.  These are similar to our standard slider but made from Red Delrin, so they can be a direct replacement for any of...

These are a direct replacement for our delrin slider ends used on our Upper Shock Sliders and 2018 and up Passenger Peg Frame Sliders.  These are similar to our standard slider but made from Orange Delrin, so they can be a direct replacement for any...

These are a direct replacement for our delrin slider ends used on our Upper Shock Sliders and 2018 and up Passenger Peg Frame Sliders.  These are similar to our standard slider but made from blue Delrin, so they can be a direct replacement for any...

These are a direct replacement for our delrin slider ends used on our Upper Shock Sliders and 2018 and up Passenger Peg Frame Sliders.  These are similar to our standard slider but made from blue Delrin, so they can be a direct replacement for any...

These are a direct replacement for our delrin slider ends of our Upper Shock Sliders and 2018 and up Passenger Peg Frame Sliders.  These are similar to our standard slider but made from White Delrin, so they can be a direct replacement for any of...