-
Road Glide Fairing Support Brackets
FSBRG$65.95 - $73.45RRP:Road Glide Fairing Support Bracket kit for both 2013 and earlier and 2014 and up Harley Davidson Road Glide FLHR models. These brackets would be for those looking to install one of our highway peg... -
2024-2025 Road Glide Fairing Support Brackets
FSBRG-24Inc. TaxInc. TaxRRP: Inc. Tax$65.95RRP:Road Glide Fairing Support Bracket kit for the 2023 CVO and 2024 and up Harley Davidson Road Glide FLHR models. These brackets would be for those looking for a simple solution for removing the large... -
Replacement 2014 & Up Road Glide Fairing Bracket Hardware
REPL-HW-FSBRGInc. TaxInc. TaxRRP: Inc. Tax$3.95RRP:This is the replacement hardware for our 2014 & Up Road Glide Fairing Bracket Kit. -
Riser Top Clamp
UHBC$27.00 - $38.00RRP:This is a remake of the Factory HD Riser Top Clamp used on most models before 2017. It works directly with our One Piece Lower risers (OPLR & COPLR model risers) and Road Glide risers... -
Weld-In Riser Spuds
WIRS$10.00 - $12.00RRP:Weld In Riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing...
Description
Road Glide One-Piece Handlebar Riser for 2013–2024 Models
Rigid, Clean Design with Easy Installation – No Trim Modifications Needed
Upgrade your 2013 and earlier, or 2014–2024 Harley-Davidson Road Glide with our custom-designed handlebar risers, built to improve comfort, functionality, and aesthetics. Featuring a wider base design, these risers allow for a simple installation without modifying the factory trim panel, providing a clean look with easy gauge visibility—unlike traditional risers or T-bars that obstruct the view with uprights.
The rigid construction is achieved through a unique design, where the two uprights are tied together, minimizing flex and reducing the possible twist seen with taller traditional risers. With welded-in bungs at the base and drilled holes for internal wiring, these risers are as functional as they are durable.
Key Features:
Custom fit for 2013–2024 Road Glide models
Wider base design allows installation without modifying factory trim panel
Enhanced gauge visibility with no uprights blocking your view
Rigid construction with uprights tied together for increased stability
Drilled for internal wiring, with holes 1" below clamping surface
Upper clamp fits standard HD clamps with 1" bore for easy handlebar attachment
Made from 1-1/4" diameter steel tubing for added strength and rigidity
Available with standard or throttle-by-wire handlebars
Handlebars made from 1" DOM chrome moly tube for strength and durability
Bars feature 3" rise, 2.5" pullback, and 31" width—similar to CR high MX bars
Available in 10", 12", 14", and 16" heights
Made in the USA
Allow 1–2 weeks for delivery
Fitment Note:
For most model years, a 10" riser can be installed with OEM cables and wires. Going taller (12" or higher) will require longer cables and wire extensions.
The risers are designed to work with Factory HD top clamps or can be paired with a top clamp for complete customization.
Road Glide Models (1998–2024):
FLTRI, FLTRSEI, FLTRSE2, FLTRSE3, FLTRI, FLTRR, FLTRX, FLTRXSE, FLTRX, FLTRXSE
Road King Models (1998–2024):
FLHR, FLHRC, FLHRCI, FLHRS, FLHRSI, FLHRSE, FLHR, FLHRSE, FLHRXS, FLHRXS