-
Universal Footpeg Pivot
PMP$50.00This is a Universal footpeg piviot. It is tapped at either end to accept 3/8 x 16 hardware and made of stainless steel for long life. These are often used for those making their own footpegs or... -
Weld On Pivot Bushings
WOPB$5.50 - $6.50These parts are great for making lower controls sprung seat piviots and anything else that needs to pivot or rotate freely without premature wear on your hardware. These are mild steel fittings... -
Non Pivoting Footpeg Adapter
FPA-NP$19.50These new adapters fit the factory later style clevis of most Harley Models 1984-2017. The non pivoting option would be used for those needing to keep their foot fixed under the peg during... -
Flush Weld on Pivot Assembly
FWOPB$18.00This is another version of our weld on pivot assemblies. This one is counter-bored to accept a shouldered bolt so that the bolt can be tightened completely and still allow free movement in a radial... -
Seat Pan Bungs
SPTB$4.25Seat Pan Bungs If you are making your own steel seat pan or a thin larger dia mount you will need a few of these. Their larger diameter helps spread the load around the usually much thinner seat pan...
Description
Spring Seat Front Piviot
Our front pivot contains stainless shoulder bolts for a snug fit and bronze oilite bushings for trouble free operation. When used properly, these pivots remove most side to side play found in some sprung seats. This is a weld on kit.
Our kit includes:
- 2-CNC cut weld on mounting tabs
- 2-stainless shoulder bolts
- 2-oilite bushings installed in tabs
- selective shims for adjustable preload
- 1.125 long .750 OD weld on bung
- 1.75" overall width