T-Bar Kit

Weld Together T-bar Kit

This kit is all the parts you need to make your own 1" diameter set of t-bars. Simply trim the pre-coped uprights to your desired length, weld in the threaded riser spuds and weld on the cross bar to your desired angle. The upper bar is made 32" long and is not dimpled so you can trim them down to your desired width.

• Pre-bent 1" x .120 wall mild steel tubing, 32" wide
• 2 Pre-coped uprights, 12" long
• 2 weld in bungs, tapped to accept 1/2" x 13 hardware