-
Flush Weld on Pivot Assembly
FWOPB$18.00This is another version of our weld on pivot assemblies. This one is counter-bored to accept a shouldered bolt so that the bolt can be tightened completely and still allow free movement in a radial... -
Universal Footpeg Pivot
PMP$50.00This is a Universal footpeg piviot. It is tapped at either end to accept 3/8 x 16 hardware and made of stainless steel for long life. These are often used for those making their own footpegs or... -
Non Pivoting Footpeg Adapter
FPA-NP$19.50These new adapters fit the factory later style clevis of most Harley Models 1984-2017. The non pivoting option would be used for those needing to keep their foot fixed under the peg during... -
Sprung Seat Front Pivot
SSFP$27.00Spring Seat Front Piviot Our front pivot contains stainless shoulder bolts for a snug fit and bronze oilite bushings for trouble free operation. When used properly, these pivots remove most side to... -
Weld in Filler Bung
FB$13.50 - $16.50These are our weld in filler bungs, used with all of our vented and non vented caps. 1 1/4" x 12 thread 1 3/4" flange OD 1 1/2" stepped down OD Available in Mild Steel, Aluminum, or Stainless Steel...
Description
These parts are great for making lower controls sprung seat piviots and anything else that needs to pivot or rotate freely without premature wear on your hardware.
These are mild steel fittings with a bronze bushing already pressed into place. Just weld on any part or pedal you need to piviot all bushing inside diameters are common sizes with close tollerances for very little play. They are a machined 1018 mild steel outer sleeve that can be easily welded onto with a high temp graphite bronze oilite bushing peressed into the center.
LARGE
bushing I.D. of .500"
weld on O.D. of 1.00"
1.00" in length
SMALL
bushing I.D. of 3/8"
weld on O.D. of 7/8"
length of 3/4"