-
1/2" x 13 Stepped Handlebar Bung
SHBB12c$7.50 - $8.50These are two of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same size used in most handlebar mounting. You can choose between a... -
1/2" x 13 Stainless Stepped Handlebar Bung
SHBBSS$7.50 - $9.00These are one of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same thread size used in most handlebar mounting. The stepped down... -
Pan America Handlebar Riser
OPLPAR$225.00 - $240.00These are our one piece lower risers specific for the new Harley Davidson Pan America models. These are available in a variety of heights and pullbacks to get you comfortable on those long... -
Wide Flange 1/2 x 20 Threaded Stepped Handlebar Bung
wfshbb12f$9.75These are one of our larger versions of our weld in stepped or tophat style bungs. These ones are drilled and tapped through for a 1/2" x 20 ( fine thread) bolt the same size used in most handlebar... -
Wide Flange 1/2 x 13 Threaded Stepped Handlebar bung
WFSHBB12C$9.75These are one of our larger versions of our weld in stepped or tophat style bungs. These ones are drilled and tapped through for a 1/2" x 13 bolt the same size used in most handlebar mounting. The...
Description
Looking for that motocross feel without the hassle of sleeving your controls or having to use other then stock bore style risers? Then, these are for you. We took the ever popular CR high MX handlebar bend and made them in a full 1" diameter bar. Set them up for internal wire and even throttle by wire option. These bars are also knurled through the clamping section to keep them where you want them, once locked in place. If you like the feel of the CR high bend but want something a little taller we offer our Extra High bend with a 5.5" rise.
- 1" diameter tube through clamping and control surface
- For internal wire
- Throttle by wire available
- 3" rise for standard and 5.5" rise on the Extra high
- 2.5" pull back, 31.5" width
- Gloss black powdercoat