Kickstand Lift Block 2020 to current Low Rider S

If you are running extra tall shocks or front forks, your bike may experience an excessive angle when leaned over on the kickstand. Our kickstand lift block can help eliminate this issue. It bolts directly to the bottom of your kickstand with the supplied hardware and adds 1" to the height of the kickstand You just mark your kickstand with the supplied pilot hole in the block, drill the mounting hole and install it in place.  Please check your kickstand to make sure it has the pointed profile at the base pad where it touches the ground.  Specific for the 2020 to current Low Rider S.

• Made of billet 6061-T6 aluminum
• Cut to match the kickstand contour of most factory kickstands
• Hardware included
• Sold as a kit