Seat Parts

Tapered / Angled Seat Pan Bungs These tapered seat bugs are used to attach the springs for a sprung seat when a flat bung will not work. The taperd side gets welded to the seat pan to help create a more parallel orientation for the seat spring for a...

Spring Seat Front Piviot Our front pivot contains stainless shoulder bolts for a snug fit and bronze oilite bushings for trouble free operation. When used properly, these pivots remove most side to side play found in some sprung seats. This is a weld on...

Seat Spring Perches / Mount These are our Seat Spring Perches.  These are normally welded to the chassis crossbar to locate and retain the lower section of the springs for your sprung solo seat. These are made from a solid piece of mild steel and...

Seat Pan Bungs If you are making your own steel seat pan or a thin larger dia mount you will need a few of these. Their larger diameter helps spread the load around the usually much thinner seat pan and the shallow thickeness enables you to keep the...