-
Weld On Coped Riser Spuds
CWORS$7.00Weld On Coped Riser Spuds These bungs are used to take place of a standard bolt on riser clamp. They are ment to be welded to your favorite set of bars using the coped section of the bung to fit... -
Stainless Coped Weld On Riser Spuds
CWORSSS$9.00Stainless Weld On Coped Riser Spuds These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set... -
1/2" x 20 Stainless Weld in Riser Spuds
WIRSss$12.75Stainless Weld In riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120"... -
Riser Top Clamp
UHBC$25.00This is a remake of the Factory HD Riser Top Clamp used on most models before 2017. It works directly with our One Piece Lower risers (OPLR & COPLR model risers) and Road Glide risers... -
Road Glide Riser
RGLR$210.00 - $344.00These risers are made specifically for the 2013 and earlier and the 2014 to present Road Glide models. The wider base width of the riser allows installation without modifying the factory trim...
Description
Weld In Riser Spuds
These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size for mounting to factory bushings. These are the same inserts we use in all of our welded t-bars and T-bar DIY kits. The inserts are tapped all the way through giving you a full 1.5" of thread for extra strength.
- For 1" and 1 1/4" tube .120 wall tube
- Made of 1018 Mild Steel
- Tapped all the way through to accept 1/2" x 13 thread hardware. 1.5" long
- .750" dia to fit into 1" x .120 or 1" dia to to fit into 1.25" x .120
- Come in sets 2pc per order