-
Weld On Coped Riser Spuds
CWORS$7.00Weld On Coped Riser Spuds These bungs are used to take place of a standard bolt on riser clamp. They are ment to be welded to your favorite set of bars using the coped section of the bung to fit... -
Stainless Coped Weld On Riser Spuds
CWORSSS$9.00Stainless Weld On Coped Riser Spuds These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set... -
1/2" x 20 Stainless Weld in Riser Spuds
WIRSss$12.75Stainless Weld In riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120"... -
Riser Top Clamp
UHBC$27.00 - $38.00This is a remake of the Factory HD Riser Top Clamp used on most models before 2017. It works directly with our One Piece Lower risers (OPLR & COPLR model risers) and Road Glide risers... -
Road Glide Riser
RGLR$210.00 - $344.00Road Glide One-Piece Handlebar Riser for 2013–2024 ModelsRigid, Clean Design with Easy Installation – No Trim Modifications Needed Upgrade your
Description
Weld In Riser Spuds
These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size for mounting to factory bushings. These are the same inserts we use in all of our welded t-bars and T-bar DIY kits. The inserts are tapped all the way through giving you a full 1.5" of thread for extra strength.
- For 1" and 1 1/4" tube .120 wall tube
- Made of 1018 Mild Steel
- Tapped all the way through to accept 1/2" x 13 thread hardware. 1.5" long
- .750" dia to fit into 1" x .120 or 1" dia to to fit into 1.25" x .120
- Come in sets 2pc per order