-
Stainless Coped Weld On Riser Spuds
CWORSSS$9.00Stainless Weld On Coped Riser Spuds These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set... -
Weld-In Riser Spuds
WIRS$10.00 - $12.00Weld In Riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing... -
1/2" x 20 Stainless Weld in Riser Spuds
WIRSss$12.75Stainless Weld In riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120"... -
Coped weld on steel tab
cwot38$3.75This is a 3/16 thick mounting tab to hold up to those harsh applications. It is made of 3/16" thick mild steel to reduce bending or distorting under load like the stamped steel ones that are made of... -
Riser Top Clamp
UHBC$25.00This is a remake of the Factory HD Riser Top Clamp used on most models before 2017. It works directly with our One Piece Lower risers (OPLR & COPLR model risers) and Road Glide risers...
Description
Weld On Coped Riser Spuds
These bungs are used to take place of a standard bolt on riser clamp. They are ment to be welded to your favorite set of bars using the coped section of the bung to fit around the correct tubing size. They are threaded to accept standard riser bolts with 1/2 x 13 thread pitch. By welding these in place you no longer have to worry about your bars slipping in the clamps ever again. We make them in three different cope sizes to help fit your needs.
- Made of 1018 Mild Steel
- Available in 7/8", 1", or 1 1/4 O.D.
- 7/8" coped bungs are 7/8 O.D.
- 1" and 1 1/4 coped bungs are 1" O.D.
- Stand off length of 1"
- Tapped to accept 1/2 x 13 bolt or stud
- For making handlebars purchase a quantity of 2
- SOLD EACH