-
Stainless Coped Weld On Riser Spuds
CWORSSS$9.00Stainless Weld On Coped Riser Spuds These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set... -
Weld-In Riser Spuds
WIRS$10.00 - $12.00Weld In Riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing... -
Weld On Coped Riser Spuds
CWORS$7.00Weld On Coped Riser Spuds These bungs are used to take place of a standard bolt on riser clamp. They are ment to be welded to your favorite set of bars using the coped section of the bung to fit... -
1/4" X 20 Stainless Threaded Bung
TB14CSS$4.00 - $4.25These weld in threaded bungs are made from round5/8" solid Stainless steel bar stock they are drilled and threaded for 1/4" x 20 thread. Bungs come in a few different length and diameter options... -
1/2" x 13 Stainless Stepped Handlebar Bung
SHBBSS$7.50 - $9.00These are one of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same thread size used in most handlebar mounting. The stepped down...
Description
Stainless Weld In riser Spuds
These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size for mounting to factory bushings. These are the same inserts we use in all of our welded t-bars and T-bar DIY kits. The inserts are tapped all the way through giving you a full 1.5" of thread for extra strength.
- For placement inside your choice of 1" and 1 1/4" .120 wall tube
- Made of 304 Stainless Steel
- Tapped all the way through to accept 1/2" x 20 thread hardware. 1.5" long
- .750" dia to fit into 1" x .120 or 1" dia to to fit into 1.25" x .120
- Sold in pairs 2pc per order