Bungs

These weld in 300 series, stainless steel NPT threaded bungs are made of round stock, drilled and threaded to your specified NPT thread. Bungs are available in a few different lengths and diameter options depending on thread size. The larger diameter of...

These weld on threaded bullet bungs are made of solid stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end.  1" Overall...

These weld in threaded bungs are made from round5/8" solid Stainless steel bar stock they are drilled and threaded for 1/4" x 20 thread. Bungs come in a few different length and diameter options depending on thread size. The .75" length are tapped...

These are our Coped Threaded Bungs. One end is coped or fish mouthed to fit over a piece of tubing or solid bar. This leaves you with a great fit over round stock and a large area for a strong weld seam for an extra strong joint. We commonly use them...

These weld on threaded bullet bungs are made of solid 304 stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end.  1.5" Overall...

Universal Mount Kit Thses universal weld on mounts can be used to mount just about anything we commony use them to mount fenders oil tanks and exhaust systems. Made from 3/4" diameter cold rolled mild steel. Each kit includes: 2 counterbored bungs 2...

These are our Coped Threaded Bungs. One end is coped or fish mouthed to fit over a piece of tubing or solid bar. This leaves you with a great fit over round stock and a large area for a strong weld seam for an extra strong joint. We commonly use them...

These weld on bungs are made of solid round stock and drilled and threaded to your specified SAE thread. Bungs come in a few differant length, and diameters to fit your custom fabrication needs. Commony used for sheetmetal or structural mounting...

These are our Coped Threaded Bungs.  One end is coped or fish mouthed to fit over a piece of tubing or solid bar. This leaves you with a great fit over round stock and a large area for a strong weld seam for an extra strong joint. We commonly use...

These are steel weld in bungs that are tapped at one end blind (not all the way through).  These  are commonly welded into fluid containers to provide a threaded mount. They are available in three different thread sizes.  Metric Sizes also...

These blind tapped tank bungs are made from 6061-T6 aluminum.  They are commonly used to weld into fluid containers to provide a threaded, leak proof mount.  They come in two different thread pitches.  The larger diameter allows more room...

These are one style of our Coped Threaded Bungs.  One end is coped or fish mouthed to fit over a piece of tubing or solid bar. This leaves you with a great fit over round stock and a large area for a strong weld seam for an extra strong joint. We...

These weld on counterbored bungs are machined from solid stainless steel to accept socket head cap screws, AKA allen bolts; used for a super clean look. These come in a 5/8" outer diameter, drilled and counterbored to accept a 1/4" diameter bolt...

Weld In Riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size for...

Weld On Coped Riser Spuds These bungs are used to take place of a standard bolt on riser clamp. They are ment to be welded to your favorite set of bars using the coped section of the bung to fit around the correct tubing size. They are threaded to...

These weld on counterbored bungs are machined from 304 stainless steel to accept socket head cap screws AKA allen bolts used for a super clean look. Machined from solid stainless bar stock and drilled to accept a 3/8" diameter bolt.  Commonly used...

This bung is common thread for British gas tanks and petcocks. They are British Standard Pipe Thread Parallel in a 1/4" size.   Made of Mild Steel 1/4" BSPP Sold Each        

Machined from solid stainless steel bar stock and drilled and tapped to national pipe thread (NPT).  Bungs are commonly welded into a tank assembely and are tapped to accept common fittings used on fluid containers such as oil bags and gas tanks...

This oil feed bung is made just for all of you Triumph builders, it is tapped to accept the factory style oil feed fitting that is used in the earlier Triumph oil tanks. Most builders like using the factory style fitting for traditional looks and because...

These weld in Stainless steel bungs are commonly welded into fluid containers to provide a threaded mount.  Offered in three different thread pitches.   Thread Size Outer Diameter Overall Length 1/4" x 20 5/8" 1.25" 5/16" x 18 3/4" 1.25"...

These are stainless heim joints/ rod ends are  used commonly in the bike industry for shifter rods. The common thread  used in most Factory HD and aftermarket shifter rods is 5/16" x 24. Also available in 1/4 x 28. They can also be used when...

20MM Petcock Bung For use with triumph/style petcocks 20mm male thread Made of 1018 mild steel Sold each