Handlebar Bungs

These are one of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same thread size used in most handlebar mounting.  The stepped down section is 1/4" smaller then the larger flange dia so it...

These are two of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same size used in most handlebar mounting.  You can choose between a stepped down section that is 3/4" so it will slip into 1" x...

These are one of our larger versions of our weld in stepped or tophat style bungs. These ones are drilled and tapped through for a 1/2" x 20 ( fine thread) bolt the same size used in most handlebar mounting. The stepped down section is so it will slip...

These are one of our larger versions of our weld in stepped or tophat style bungs. These ones are drilled and tapped through for a 1/2" x 13 bolt the same size used in most handlebar mounting. The stepped down section is so it will slip into 1" or 1 1/4"...

Stainless Weld In riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size...

This product was originally made for those of you who purchased a set of t-bars but after a time wished you had gotten a little taller ones. These spacers allow the ability to rise your bars 1.5" from their current location. Most bars with internal...

These spacers allow the ability to rise your bars 1-1/2" from their current location. These spacers and longer bolts can be added without having to rewire, and most OEM cables can take the extra 1.5" so the install is usually only a few minutes and there...

Weld In Riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size for...

Weld On Coped Riser Spuds These bungs are used to take place of a standard bolt on riser clamp. They are ment to be welded to your favorite set of bars using the coped section of the bung to fit around the correct tubing size. They are threaded to...

Stainless Weld On Coped Riser Spuds These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set of bars using the coped part of the bung. They are...