M/C Parts

Our ever popular crash bar is now available in a 2 step style for all Mid control and forward control 2018- present Harley Softail models.  The front crash bar does what it sounds like it should, it protects the front section of the bike in case of...

Our ever popular crash bar is now available for the 2018 and up Softail Forward Control models, like the Fat Bob, Sport Glide, Breakout, Softail Slim, Heritage, and Deluxe.  This crash bar can also be used on the mid control models, as well as a...

Road Glide Fairing Support Bracket kit for both 2013 and earlier and 2014 and up Harley Davidson Road Glide FLHR models. These brackets would be for those looking to install one of our highway peg crashbars on their Road Glide, or for those looking for a...

If you are looking to lift the back end of your 2018 and up Softail model without the big cost of a new shock, then this is for you.  The shock extension is a replacement eyelet that installs on the swing-arm side of the shock.  It is made of...

These are our one piece lower risers. They work with the stock upper riser clamp used on most Harley models allowing you to reuse the stock upper clamp, tachs and speedo. Mounting is simple with the use of the factory speedo or tach brackets. Multiple...

Our passenger peg crash bar works great in conjunction with our Highway Peg Crash Bar. This fully TIG welded assembly takes place of your standard passenger pegs on the 06 and up Dyna's. The location and width is very similar to the stock passenger pegs...

Delrin frame sliders have been used on street bikes for years to protect the sides of them in case of a crash. Delrin by nature is very resistant to shattering under high impact and has a slippery quality, making it slip across the pavement as opposed to...

Delrin frame sliders have been used on street bikes for years to protect the sides of them in case of a crash. These sliders use the upper shock bolt to locate them on your bike and will help protect your shocks as well as most of the rear of the bike...

If you are running extra tall shocks or front forks, your bike may experience an excessive angle when leaned over on the kickstand. Our kickstand lift block can help eliminate this issue. It bolts directly to the bottom of your kickstand with the...

If you are running extra tall shocks or front forks, your bike may experience an excessive angle when leaned over on the kickstand. Our kickstand lift block can help eliminate this issue. It bolts directly to the bottom of your kickstand with the...

If you are running extra tall shocks or front forks, your bike may experience an excessive angle when leaned over on the kickstand. Our kickstand lift block can help eliminate this issue. It bolts directly to the bottom of your kickstand with the...

This is our replacement hardware kit for our 49mm Quarter Fairing Bracket kit for Dyna models.    QFB1849 - 2018 & Up Street Bob Hardware Pack Includes: 4 bolts 4 washers   QFB18FB - 2018 Fat Bob Hardware Pack Includes: Bolt for...

These are our T-Sport Fairing Brackets specific to the new 2020 Low Rider S.  We supply you with the adapter brackets that will let you install the factory HD T-Sport fairing to a late model inverted fork. These brackets bolt to the OEM fairing...

These are our Quarter Fairing Brackets specific to the new 2020 Low Rider S.  We supply you with the adapter brackets that will let you install the factory HD quarter fairing to a late model inverted fork. These Brackets bolt to the OEM fairing...

This is our replacement hardware kit for our 49mm Quarter Fairing Bracket kit for Dyna models.    QFB49 Hardware Pack Includes: 4 bolts 4 washers 1 headlight spacer and bolt    

These are our Quick Release Dyna Quarter Fairing Brackets for 49mm forks used on the 2018 Street Bob and Low Rider models.  We supply you with the adapter brackets that will let you install the factory HD quarter fairing to a late model 49mm front...

  Here’s an SEO-optimized product description for your Swingarm Lift Kit: Swingarm Lift Kit for Dyna & Sportster – Improve Ground Clearance & Cornering Performance Looking to enhance your cornering performance and...

Our Reach Reducers are for those having a hard time getting their feet to the main bar location on our Highway Peg and other Crash Bars.  This kit will add 4" of offset to the original bar location.  It is also adjustable for height and as it...

This is our Front crashbar for the Harley Davidson Dyna models with forward controls or floorboards, and can also be used on Mid control models for those who like the higher look. The front crash bar does what it sounds like it should, it protects the...

Our ever popular crashbar is now available for the 2018 and up Softail Forward Control models only used on the Fat Bob, Sport Glide, and Softail Slim.  The fully TIG welded assembly takes place of your bolt on highway pegs and serves the function as...

Our Grabber Foot pegs are a direct bolt on to most later Harley Davidson models.  These foot pegs are a great way to give you that motocross MX feel on the street.  The extra grip helps keep your feet in place for aggressive riders.  The...

These are our one piece lower risers. They work with the stock upper riser clamp used on most Harley models. Because they work with the stock upper clamp, tachs and speedo mounting is simple with the use of the factory speedo or tach brackets. Multiple...

Dyna Mid Control Adjustable Shifter Linkage This shifter linkage is designed for late model Dynas with factory mid controls. It replaces the non-adjustable linkage that is prone to failure. We have had several customers come in with broken factory links,...

Looking for that motocross feel for your 2024 Bagger or 2025 Softail, then these are for you.  We took the ever popular CR high Motocross handlebar bend and made them in a full 1" diameter bar.  Set them up for internal wire and for use for the...

Gripper Harley Bagger FLH Model Brake Pedal Pad Upgrade your ride with this high-performance brake pedal pad designed specifically for Harley Bagger FLH models. Crafted from precision laser-cut 1018 cold-rolled steel, each pedal is engineered for...

 Our new Crash Pads are a footpeg that mounts to your passenger peg crashbar through the slider end.  They give your passenger a solid resting place on your passenger peg crashbar for those long rides.  Made of 1018 mild steel with...

Crash Pads for Highway Peg Crashbar  Say goodbye to slippery footrests with our Crash Pads for Highway Peg Crashbars, designed to provide a secure and comfortable resting place for your feet during long rides. Unlike traditional grip tape, these...

These Gusset Mounted Fog Light Mounts mount to our crashbars on the Sportster and 2018 to current Highway Peg Crashbars.  These  are for those looking to add more illumination for the rider as well as greater visibility to other drivers. ...

These Gusset Mounted Fog Light Mounts mount to our crashbars on the Sportster and 2018 to current Highway Peg Crashbars.  These  are for those looking to add more illumination for the rider as well as greater visibility to other drivers. ...

These are our Gripper Adjustable Foot Pegs. Their larger platform allows greater control and larger spread of you body weight. The 7 threaded holes around the perimeter allow adjustment of grip to suit your needs by simply changing the hardware length or...

Looking for that motocross feel without the hassle of sleeving your controls or having to use other then stock bore style risers?  Then, these are for you.  We took the ever popular CR high MX handlebar bend and made them in a full 1" diameter...

This is a little twist on our standard sprockets. These spoked style sprockets are available in 52, 55, 60 of 65 tooth styles. They are also available for the '99 and earlier or 2000 and up style wheels. These are a flat no offset style made from 1/4"...

These are our Quick Release Dyna Quarter Fairing Brackets for 49mm forks. We supply you with the adapter brackets that will let you install the factory HD quarter fairing to a late model 49mm front fork. The HD quick releases are not included but are...

For those running our pullback riser with the stock upper clamp on the 2022 to current Low Rider S and other models, this can put the gauge at an angle that is hard to read.  Our new speedo mount will reduce the angle of the gauge face so that on...

Quarter Fairing Bracket kit for the 2018 and up Harley Davidson Fat Bob models.  This kit supplies the mounting brackets to attach a factory style HD quarter fairing directly to the front for of the 2018 to present Fat Bob inverted front end. Our...

Don't like the look of the rectangle headlight assembly on your new 2018 and up Harley Davidson Fat Bob?  This is our conversion bracket to help you bolt on a more standard round style headlight from the 2018 Street Bob models, 2017 and earlier Dyna...

Kickstand Lift Block for Taller Shocks & Front Forks – Improve Bike Stability If you're running extra tall shocks or front forks on your bike, you may have noticed an excessive lean when it's on the kickstand. The Kickstand Lift Block is the...

These Universal Fog Light Mounts mount to our Bagger and touring crashbars, they can also be used on any of our other crashbars for those who want the light closer to the outer end of the bar.  The mount location keep the light out of the way for...

These Gusset Mounted Fog Light Mounts mount to our High Bar and High Sep Crashbars for the 2018 to current softail models.  These  are for those looking to add more illumination for the rider as well as greater visibility to other drivers...

These frame mounted Fog Light Mounts for all Mid Control Dyna or FXR models are for those looking to add more illumination for the rider as well as greater visibility to other drivers.  These mounts work with the Baja Designs S1 lights.  This...