-
Tapered / Angled Seat Bung
TSB$15.50Tapered / Angled Seat Pan Bungs These tapered seat bugs are used to attach the springs for a sprung seat when a flat bung will not work. The taperd side gets welded to the seat pan to help create a... -
Stepped NPT bungs
SNPT$4.25 - $8.001018 Mild Steel NPT Weld-In Bungs – Multiple Thread Sizes Available These weld-in NPT threaded bungs are precision-machined from solid 1018 cold rolled mild steel round stock -
Weld in Filler Bung
FB$14.50 - $17.50These are our weld in filler bungs, used with all of our vented and non vented caps. 1 1/4" x 12 thread 1 3/4" flange OD 1 1/2" stepped down OD Available in Mild Steel, Aluminum, or Stainless Steel... -
Filler Cap and Bung
FCwB$25.75 - $29.75Filler Cap and Bung Filler Cap and bung these are most commonly used for oil tanks or any other fluid container such as an overflow tank that does not need to be vented. We make a vented version of... -
Tall Filler Bung
TFB$13.75 - $14.75This is a different version of our ever popular filler bungs, these weld filler bungs are taller than our standard flanged ones for those who would like to stand the filler neck off of your tank a...
Description
Seat Pan Bungs
If you are making your own steel seat pan or a thin larger dia mount you will need a few of these. Their larger diameter helps spread the load around the usually much thinner seat pan and the shallow thickeness enables you to keep the seatpan mounted low on the frame. We commonly use to mount seat springs and the front piviot to the pan.
- 1" O.D. cold rolled steel
- .400" long -Tapped to 3/8x16 or 5/16x18
- sold as each