Stainless

These are one of the larger versions of our stepped bungs. They are drilled and tapped through for a 1/2" x 13 bolt, the same thread size used in most handlebar mounting.  The stepped down section is 1/4" smaller then the larger flange dia so it...

Stainless Stepped Blind Tank Bungs These stepped, stainless steel, blind threaded bungs (some call them top hat bungs) are great for use in gas tanks, oil tanks or any other stainless steel fluid container.  They have a step machined in them to keep...

These weld in 300 series, stainless steel NPT threaded bungs are made of round stock, drilled and threaded to your specified NPT thread. Bungs are available in a few different lengths and diameter options depending on thread size. The larger diameter of...

These weld on threaded bullet bungs are made of solid stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end.  1" Overall...

These weld in threaded bungs are made from round5/8" solid Stainless steel bar stock they are drilled and threaded for 1/4" x 20 thread. Bungs come in a few different length and diameter options depending on thread size. The .75" length are tapped...

These weld on threaded bullet bungs are made of solid 304 stainless steel and drilled and tapped to you thread choice. These are blind bungs (hole does not go all the way through) and are rounded with a full radius at opposite end.  1.5" Overall...

These weld in bungs are made of solid Stainless round stock, drilled and threaded to accept 5/16 X 18  thread.  The .75" length stainless bungs are tapped through and the longer 1.25" ones are tapped blind. Great for all your fabrication...

These weld in threaded bungs are made of solid 304 Stainless round stock and drilled and tapped to 3/8" x 16 thread. The .75" lengths are tapped through and the longer 1.25" ones are tapped blind. Great for all your fabrication mounting needs.  ...

Stainless Weld In riser Spuds These can be used by anyone making there own set of t-bars or similar custom handlebars that don't use a riser clamp. They are welded on the inside of a piece of .120" wall tubing and provide the correct 1/2" dia bolt size...

These weld on counterbored bungs are machined from solid stainless steel to accept socket head cap screws, AKA allen bolts; used for a super clean look. These come in a 5/8" outer diameter, drilled and counterbored to accept a 1/4" diameter bolt...

These weld on counterbored bungs are machined from stainless steel to accept socket head cap screws AKA allen bolts used for a super clean look. All of them are made oin a 3/4" outer diameterand machined to accept a 5/16" dia bolt. BOLT SIZE LENGTH...

These weld on counterbored bungs are machined from 304 stainless steel to accept socket head cap screws AKA allen bolts used for a super clean look. Machined from solid stainless bar stock and drilled to accept a 3/8" diameter bolt.  Commonly used...

Machined from solid stainless steel bar stock and drilled and tapped to national pipe thread (NPT).  Bungs are commonly welded into a tank assembely and are tapped to accept common fittings used on fluid containers such as oil bags and gas tanks...

Stainless Weld On Coped Riser Spuds These bungs are commonly used to take place of a standard bolt on riser clamp when building a set of handlebars. They are ment to be welded to your favorite set of bars using the coped part of the bung. They are...

These weld in Stainless steel bungs are commonly welded into fluid containers to provide a threaded mount.  Offered in three different thread pitches.   Thread Size Outer Diameter Overall Length 1/4" x 20 5/8" 1.25" 5/16" x 18 3/4" 1.25"...

These are stainless heim joints/ rod ends are  used commonly in the bike industry for shifter rods. The common thread  used in most Factory HD and aftermarket shifter rods is 5/16" x 24. Also available in 1/4 x 28. They can also be used when...