Tanks

Stepped Blind Tank Bungs These stepped steel blind threaded bungs (some call them tophat bungs) are great for use in gas tanks, oil tanks or any other steel fluid conatiner. They have a step machined in them to keep all of them mounted at the same...

This gas tank kit gives you the peices needed to relocate your petcock and add a crossover. includes: Two 1/8" NPT bungs for crossovers and one 3/8" npt for a petcock

Filler Cap and Bung Filler Cap and bung these are most commonly used for oil tanks or any other fluid container such as an overflow tank that does not need to be vented. We make a vented version of these filler necks as well. 1.250 x 12 threaded bung...

For use with Late HD style petcocks 22mm male thread made of 1018 mild steel available in two lengths to fit your application Sold each standard or factory length$9.00 2" overall length for custom applications$17.50

Pipe Bomb Oil Tank Kit 5" Diameter This is a DIY oil tank kit, which includes all the parts you need to fabricate your own custom oil tank for your custom motorcycle. Customers have also used these tanks for many other uses other than just motorcycle oil...

Machined from solid mild steel bar stock and drilled and tapped to national pipe thread (NPT).  Bungs are commonly welded into a tank assembly and are tapped to accept common fittings used on fluid containers, such as oil bags and gas tanks. Made in...

Stainless Stepped Blind Tank Bungs These stepped, stainless steel, blind threaded bungs (some call them top hat bungs) are great for use in gas tanks, oil tanks or any other stainless steel fluid container.  They have a step machined in them to keep...

This is a vented version of our common Filler Cap and Bung. These caps use the same standard bung we have used for years. They have a small .040" hole for venting with a replaceable brass vent fitting installed on the inside to reduce liquid seepage...

    F' Bomb Oil Tank Kit All the parts you need to Fabricate your own custom oil tank for your custom motorcycle.  This is a weld together kit for those who don't mind doing a little welding and grinding themselves and saving some money in...

Pipe Bomb Oil Tank Kit 6" Diameter This is a DIY oil tank kit, this kit includes all the parts you need to fabricate your own custom oil tank for your custom motorcycle. Customers have also used these tanks for many other uses other than just motorcycle...

Flanged Cap F' Bomb Oil Tank Kit 5" dia All the parts you need to Fabricate your own custom oil tank for your custom motorcycle.  This is a weld together kit for those who don"t mind doing a little welding and grinding themselves and saving some...

By popular demand we are now making a Brass version of our common Vented Filler Cap and Bung. These caps use the same standard bung we have used for years. They have a small .040" hole for venting with a replaceable brass vent fitting installed on the...

This kit includes all threaded fittings needed for proper function of an oil tank. This kit contains three 1/8 NPT fittings for your oil lines (feed, vent, and return) it also contains a threaded filler cap and bung. All weld in parts are available in...

Domed Oil Tank Endcaps We have been selling these endcaps for years in our Pipe Bomb Oil Tank Kits and now you can purchase them seperately from the kit. These domed caps are stamped out of 14 gauge mild steel and their height is half of their diameter. ...

Oil Tank Tubing by the Inch We have been selling this 5" and 6" mild steel tubing for years in our Pipe Bomb Oil Tank Kits and now you can purchase it separately from the kit. If you are looking to get some tubing for the shell of your oil tank but don't...

Flat Round Oil Tank Endcaps If you have your own tubing but would like some perfect circles to cap it of with, these are for you. We stock a few different sizes. If you do not see a size you need, let us know and we can cut some out for you to your...

This is our new brass gas cap for fitment on all HD models from 1986 on up to present. The top is made of solid brass and comes with the same O-ring and thread used by the factory. They feature a knurled outer edge for good looks and extra grip for...

Flanged Oil Tank Endcaps These are the endcaps used in our Flanged F Bomb Tank. They are made on our pullmax to fit either a 5" or 6" dia oil tank. These are made from 16 ga mild steel with the extra body line to give your custom built oil tank some...

By popular demand we are now making a Brass Vented version of our common Filler Cap and Bung Can be used for gas tanks oil tanks or any other fluid container. These caps use the same standard bung we have used for years so if you want to upgrade to a...

Machined from solid stainless steel bar stock and drilled and tapped to national pipe thread (NPT).  Bungs are commonly welded into a tank assembely and are tapped to accept common fittings used on fluid containers such as oil bags and gas tanks...

This oil feed bung is made just for all of you Triumph builders, it is tapped to accept the factory style oil feed fitting that is used in the earlier Triumph oil tanks. Most builders like using the factory style fitting for traditional looks and because...

This is an OEM style weld in gas tank bung, the same one used on all of the later Harley Davidson Tanks. Permits the use of factory or the vast variety of aftermarket replacement gas caps on the market. The bung is made of mild steel and has the threads...

These mounts are most commonly used for mounting gas tanks and oil tanks. The rubber isolaters help reduce the risk of cracks developing in your fluid container. They use the common flat side tank mount rubbers that can be found at any Harley dealer. The...

Rubber Tank Mount Kit These mounts are most commonly used for mounting gas tanks and oil tanks. The rubber isolaters help reduce the risk of cracks developing in your fluid container. They use the common flat side tank mount rubbers that can be found at...

20MM Petcock Bung For use with triumph/style petcocks 20mm male thread Made of 1018 mild steel Sold each